Product Experts Available Now!
Call 1-800-940-8924
Solera RV Slide-Out Awning - 187" Wide - White
(1449 reviews)
Price: $587.14
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1449)
- Q & A (0)
- Photos
Solera RV Awning - LCV000163307
Highlights
- Keeps Debris and Water Off the Slide-Out: Prevents clogging leaves, pooling water, and mildew damage when slides retract.
- Extends and Retracts Automatically: Awning moves with the slide-out, no extra steps needed during setup or teardown.
- Fabric Stands Strong Against Weather: Heavy-duty 13.5-oz vinyl with heat-welded seams won’t crack down to -25°F.
- Helps Keep RV Interior Cooler: Blocks direct sunlight over the slide roof to reduce heat inside.
- Straightforward DIY Install: Includes brackets, hardware, and awning rail; mounts with self-tapping screws.
- Sized for Proper Drainage: 48" extension with steep mounting angle lets rainwater run off instead of pooling.
Features to know about
Keeps Your Slide-Out Clean and Dry: Automatic Protection from Rain and Debris
This topper shields your slide-out from leaves, twigs, and pooling rainwater that can lead to mildew or seal damage. It installs directly over the slide box and extends and retracts automatically with the room, so it’s always in place when you need it. With 187" of coverage and a 48" extension, it fits slide-outs measuring 182"–187" wide, giving you complete protection each time you set up camp.
Built to Handle the Elements: Heavy-Duty 13.5-oz Vinyl with Heat-Welded Seams
The premium 13.5-oz vinyl fabric is made to handle constant sun, rain, and cold without cracking or fading. It’s cold-crack tested down to -25°F, so it stays flexible even in freezing conditions. The seams are heat-welded instead of stitched, sealing out water that could seep through during storms for long-term durability.
Easy Two-Person Install: All Mounting Hardware Included
Everything you need comes in the box—brackets, hardware, and the awning rail—so setup is straightforward. The awning fabric arrives pre-mounted on the roller tube to save time. The rail can be mounted up to 5" above the trim on top of your slide box, and self-tapping screws make securing the access plate simple. Once installed, the topper moves with your slide so there’s nothing extra to manage at camp.
Sized Right Every Time: Designed for 182"–187" Wide Slide-Outs
To get the right fit, measure from outer edge to outer edge of your slide trim. You’ll need at least 7" of clearance on each side—if space is tight, order the next size down for proper coverage. For dual slides side by side, keep a total of 14" between them for both toppers to operate smoothly.
Clean Look That Matches Your Setup: White Fabric and Hardware
The white awning fabric pairs with matching white hardware for a clean finish that blends well with most RV exteriors. It not only looks neat but also reflects sunlight to help keep interiors cooler on hot days.
Specs
Application
- Application: slide-outs 182" - 187" wide with 48" extension
- Minimum clearance required: 7" on both sides of the slide-out (order next size down if needed)
- Clearance between 2 slide-outs: 14" total
Dimensions
- Awning rail length: 187"
- Awning fabric (when fully extended): 187" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
Warranty
- Warranty: 1-Year
Note
- Important installation note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
V000163307 Lippert Solera 15'7" Slider (Slide-Topper) in White w/ White Hardware
Customer Satisfaction Score:
75% were satisfied with this product
25% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.5
1449 reviews
by:
Vickie
04/15/2022
The overall product,the awning, is very nice. It was easy to install once we got all the materials. It should have arrived in one box, one delivery. But it didn't. With much correspondence and several different orders, we got everything and it went up in a matter of a few hours. All materials made of quality fabric.
Nice design. I would recommend this company and products.
Nice design. I would recommend this company and products.
by:
Tammy
11/05/2021
Fast shipping and delivery on time when they said they would be here.
by:
Donald
08/15/2024
Great customer service!
by:
Frank
11/10/2022
One item had to be ordered numerous times before we got the item not damaged, and the correct color. The customer was very unhappy as to how long the product took to get here. The company did send emails advising delivery dates.
by:
Belinda
09/24/2026
by:
Penny
08/24/2022
by:
Russell
07/20/2025
The slide-out awnings were easy to install. One issue I encountered was with one of the set screws. There was excess paint in the threaded hole. I cleaned the threads with a tap and it worked fine.
by:
Scott
05/19/2025
I received the 121" awning a few months in delay, but this was not etrailer's fault. They kept in constant contact with me and I appreciate that. The awning came on an 18 wheeler and the extruded channel had been bent slightly, but easily fixable. The hardware pack was good and wrapped up nicely. Overall, a great purchase and easy to install like 2 hours with a friend. Watch the video for the installation tips it's very helpful. Definitely worth it!
Brooke M.
5/20/2025
It looks like you nailed it with the install! I'm in "aw"ning, haha. Do you have any install tips you learned when you put on the awning?
Brooke M.
5/22/2025
@Scott Haha I like that advice! Thanks, Scott. Enjoy your Memorial Day weekend! :)
Scott
5/20/2026
Still working great..keeps my slide out roof clean.
James D.
5/20/2026
@Scott love to hear things like this, appreciate your reply and choosing etrailer!
by:
Dad ll Fix It - Mobile RV Repair
03/19/2026
The solera slide toppers are the best! Mounting is very easy, just make sure to have two people with you. I did a 67" myself, but it was difficult feeding it into the track.
Lazer S.
3/24/2026
Glad you like it! And having more than one person is definitely a good idea. These things get pretty long and awkward. What did you install this on?
by:
Barbara
10/17/2025
Product is as expected. The product was received with scratches on the metal mounting brackets. This is disappointing since the brackets are 100% visible. I will try some wax to hide or diminish unsightliness. Improved packaging suggested. Directions for install were acceptable and there were online resources.
Barbara
10/19/2026
Product is functionally working great. Paint and wax were required to diminish visible scratches.
Jameson C.
10/19/2026
@Barbara great to hear!
by:
Thomas
06/29/2025
Purchased this for our new 2025 Winnebego 2108DB trailer as a self install. Installation was very easy, easy enough I could install it almost completely without help. I did need a helper when fitting the roller into the brackets. Included instructions were clear and easy to follow. Since this is a new install, I can't comment on the durability of this accessory, but time will tell, it looks like it's of good quality.
Thomas
6/30/2026
After a year of use, the slide topper awning still looks and works great. Youd never know it wasnt a factory install. So far, no signs the Arizona sun is deteriorating the fabric, although I try to treat it with 303 Protectant, and keep the trailer covered when not in use. Still very happy with my purchase.
by:
Chris W.
10/05/2026
Perfect addition to our 2025 Lance Squire 1995. Took less than an hour for me to prep and mount the brackets and less than an hour for my son and I to mount the awning and clean up.
Robin H.
10/7/2026
Thanks for the pictures and video, looks great!
by:
Michael
10/17/2025
Fairly simple to install if you have a decent amount of handyman skills. Instructions could be better. Love how they turned out. Little insurance for my slide outs. Hope they last.
Lazer S.
10/21/2025
I think you are selling yourself a little short, Michael. Install looks like it was done by the manufacturer! Great job! Any more trips planned for the year?
by:
Michael
05/05/2024
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
Michael
5/7/2025
Couldnt be happier with slide out topper. Keeping waterdebri off slide out, protecting seal which was the goal. Not one issue with item, working great after 1 yr n probably for years to come.
by:
Joel
04/25/2026
Great product. Easy to install.
Gwendolyn Y.
4/30/2026
Looks great, Joel!
by:
Steve Kading
10/01/2025
Only complaint is the shipping tube lost one metal end and other end was all bent up. Need better ends for shipping tube. By this the awning end paint was scratched up! Lucky I didn’t lose any parts on the opened end of tube!
by:
Keath D.
07/22/2025
I went camping to find in the morning that our slide topper had come apart in the middle. We have only a few trips out with it. This is clearly a part that was not glued properly or the glue failed and allowed the material to slide out in the middle. Really disappointed!
by:
Unsatisfied customer
06/06/2026
Worst customer service ever. It took 6 different people to correct etrailer’s mistake even having to explain over and over their own part numbers they managed to get it wrong, they shipped me multiple different parts that were incorrect parts over and over. I finally order the proper parts from a different vendor who got it right the very first time. You will later be inundated with dozens of requests to “tell us how we did” well, etrailer did a crap job and are over priced too. They never stop harassing you to do reviews either
by:
Dan
05/22/2025
I have been completely satisfied with the support I receive from etrailer. I always get online to browse the catalog for what I need and then call Will to verify what I intend to order. He expertly walks me through the pros and cons of what I am getting and how that affects my needs. I am always pleasantly surprised by the variety and volume of parts and equipment that is available for anything from my equipment trailers to my camper.
Brooke M.
5/23/2025
That is fantastic, Dan! So glad Will has been able to help you out. Camper looks awesome. Do you have any Memorial Day Weekend plans?
by:
Rick
08/05/2026
The awning design is poor and does not work as indicated. The fabric is weak and Water builds up in a pool causing unnecessary weight on the slide out. Would definitely would not buy again!
by:
Travis
01/03/2019
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
Travis
1/4/2020
Our slide-out awning is still functioning perfectly. Since I had loosened the tension a bit I was concerned about it maintaining good tension over time. No problem. Still perfect! There is no noted degradation of the canopy or hardware. Thanks!
by:
Ken S
11/02/2017
A friend and I installed this topper today on a Winnebago 2101DS travel trailer. It took a little over one hour and we didn't run into any real problems. One thing the instructions said to do was to mount the hex aluminum bar in the end bracket using a self tapping 1/4-20 screw. Seemed almost impossible to do so I used a 1/4-20 tap. Worked fine.
Once the slide topper is squared away and goes in and out properly the paper instructions want you to install a black self tapping screw in the fabric slot within 1" of the end of the fabric. I didn't like the idea of running the screw through the fabric. I had some black tubing from another project which I used for the block to keep the slide fabric from moving.
The topper seems to be high quality and certainly will provide additional protection from the elements. This is definitely a two man job and my friend was great help. When we were sliding the fabric into the slide topper rail we found the best way was for me to be on the roof supporting the topper while my friend guided the fabric into the rail slot.
Once the slide topper is squared away and goes in and out properly the paper instructions want you to install a black self tapping screw in the fabric slot within 1" of the end of the fabric. I didn't like the idea of running the screw through the fabric. I had some black tubing from another project which I used for the block to keep the slide fabric from moving.
The topper seems to be high quality and certainly will provide additional protection from the elements. This is definitely a two man job and my friend was great help. When we were sliding the fabric into the slide topper rail we found the best way was for me to be on the roof supporting the topper while my friend guided the fabric into the rail slot.
Ken S.
11/2/2018
I assume it has been working well but I dont know since we traded the trailer for a larger one last April.
by:
Edward
06/13/2020
After searching the internet and checking reviews I chose etrailer for my slide out awning. I have shopped at Camping World who had the same awning but a lower price. After contacting etrailer with their price match I got the awning plus a few dollars less shipped to my door! Communications were excellent!
The installation was straight forward with ample instructions. The mounting brackets for the slide out has two positions, an upper and lower to provide clearance between the roll and top of the slide out. I used the upper. Hardware was great quality. There is ample adjustments in the brackets side to side if needed. My trailer a 2020 Aspen Trail 2750BH has the “C” rail as part of the gutter so I didn’t need to install the one provided with the awning! My wife and I installed the awning with two ladders and did not have any problems. Make sure and use the silicone spray as it really makes the awning easy to slide thru the C channel. We are happy with our purchase and will definitely use etrailer for our needs! Thank you for a quality product!
The installation was straight forward with ample instructions. The mounting brackets for the slide out has two positions, an upper and lower to provide clearance between the roll and top of the slide out. I used the upper. Hardware was great quality. There is ample adjustments in the brackets side to side if needed. My trailer a 2020 Aspen Trail 2750BH has the “C” rail as part of the gutter so I didn’t need to install the one provided with the awning! My wife and I installed the awning with two ladders and did not have any problems. Make sure and use the silicone spray as it really makes the awning easy to slide thru the C channel. We are happy with our purchase and will definitely use etrailer for our needs! Thank you for a quality product!
Edward
6/14/2021
Very pleased with our awing! We go camping once a month and have used it many times since we installed it. Still looking good, no sun fade or any other problems. It is a quality product! etrailer is my go to source! Never disappointed!
by:
Richard
06/26/2026
This order has not been delivered. The first one you tried. To deliver was too damaged to use. Now the replacement you sent and claim was delivered never arrived.
Mike L.
6/26/2026
Let me look into that and get you an ETA...
25
1449
true
Show More Reviews
See what our Experts say about this Solera RV Awning
- Awning Recommendations for 82", 154", and 183" SlidesThanks for reaching out, Leon! For your application I recommend picking up the White versions of the awnings that fit your camper so that they all look uniform: White - 85" Wide # LCV000163287 - 157" Wide # LCV000163300 - 187" Wide # LCV000163307
view full answer... - Will Dometic Weather Shield Fit with Solera Slide Topper AwningAccording to my research the weather shield you have on your Dometic slide topper is unique to the Dometic awnings and requires the awning fabric to have some additional bead seatings so you can properly install the shield. The Solera RV Slide-Out Awning - 15'7" Wide - 48" Projection - White # LCV000163307 works for slide outs measuring 182" - 187" wide but these don't include the seatings needed to fit with the weather shield you're wanting to use, so if that is a determining factor then...
view full answer... - Slide Toppers For a 2016 Prime Time Crusader 322RES 5TH Wheel CamperFirst you will need to decide if you want the slide toppers in a white or black. Also you will need to ensure you have at least 6" of clearance nest to each side of the slide for the topper to fit properly. If you do not have the minimum clearance next to a slide please let me know which topper doesn't so I can help you find the proper size so you do not have any clearance issues. White 1. # LCV000163301 2. # LCV000163285 3. # LCV000163307 Black 1. # LCV000168110 2. # LCV000168105 3....
view full answer... - Largest Available Solera Slide-Topper The largest Solera Slide-Topper we have available is the 16 Foot # LCV000194925 in Black or # LCV000163307 in White. When determining if this or another size will fit you will want to take a quick measurement on your box width. This is measured on the outside front of the box, including flange. This particular Slide-Topper works well with box widths that are 182 to 187-3/4 inches. I recommend simply verifying the measurement you took to see if this option will work for your Forest River...
view full answer... - Recommended Slide Out Awning for Each of the 3 Slide Outs on RVFor your first awning measuring 90 inches, I recommend # LCV000168106 in black or # LCV000163288 in white. For your second awning measuring 159 inches, I recommend # LCV000168110 in black or # LCV000163301 in white. For your third awning measuring 188 inches, I recommend # LCV000194925 in black or # LCV000163307 in white. This is technically only a fit for 187-3/4 inches from flange to flange but you may be able to get away with the 1/8 inch difference on each end. The fabric is longer...
view full answer... - Recommended 18 Foot Wide Solera Awning with HardwareThe largest slider awning we have available is the Solera 16' Slider (Slide-Topper) in White w/ White Hardware # LCV000163307 for a box width ranging from 182 to 187-3/4 inches. I reached out to my contact at Solera and that width would require them to make a custom part. If you want a traditional awning we have the Solera 18' Sand Fade RV Awning Roller and Fabric (Std) # LCV000223191. The included roller is the middle support I believe you are referring to. I've attached a link to...
view full answer... - Available Sizes of Slide Topper AwningsWe do offer slide topper awnings that are larger than the Solera 13' Slider # LCV000165061 that you referenced. In a 16-foot we offer part # LCV000194925 in black and part # LCV000163307 in white. We also offer 15-, 14- and 14-1/2-foot versions. You can click on the link provided to see them all and select the size you prefer. Select the size that extends a minimum of 2-1/2-inches beyond each side of your slide box width.
view full answer... - Slide Toppers For 84-3/4 Inch Slide Outs on 2013 Jayco 40 Foot BungalowThe widest Solara Slide Topper we offer is 15 feet 7 inches wide # LCV000163307 which is going to come up short and wouldn't completely cover your larger slide out. For the smaller 84-3/4 slide out, use part # LCV000163287 for sliders between 80-85 inches wide. I've linked you to an installation video that you might find helpful.
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Amanda K
Written by:
Kristen H
Installed by:
Shane H
Video by:
Jonathan Y
Video by:
Ryan G
Test Fit:
David F
Test Fit:
Ethan H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Russell
7/21/2026
I have been using my slide awnings for a year now without any issues. I dont have to worry about sticks and pine cones getting on top of my slide outs. It keeps me from having to climb on top of the RV. I highly recommend these to everyone I see.